How A Fire Sprinkler System Is Installed: A Guide
Fire protection systems are extremely important in any commercial or public building. A fire sprinkler system is a big part of any protection system. As such, installation contractors must follow specific steps to ensure that the system is installed correctly to ensure it works properly in the event of a fire.
Here are three crucial steps that a fire sprinkler installation contractor must take when installing a fire sprinkler system.
Plan the Installation
Like with every installation job, the first step is always planning. This is especially important with fire sprinklers since an incorrect installation could have devastating consequences.
For example, the contractor must determine the water supply type and pressure as well as where the sprinkler heads will be placed. The location is particularly an important factor since sprinkler heads must be placed in specific areas to be most effective. They should also be placed in a way that ensures maximum coverage with the least amount of sprinkler heads possible.
The contractor must take into account the size and layout of the building, as well as the type of fire sprinkler system that is best suited for the building. This planning stage can sometimes take the longest out of the entire installation process. The contractor has to be absolutely certain that the installation will be correct before proceeding.
Install the Pipes
Once the planning stage is complete, the contractor can start installing the pipes. This is generally the most physically demanding part of the installation process. Most buildings have their pipes hidden behind walls or ceilings, so the contractor must be able to work in small spaces.
The pipes must be adequately secured and installed before turning the water on. This ensures that there are no leaks and that the system works properly.
The contractor must also be careful not to damage any other parts of the building while installing the pipes. This is why it is so important to have a detailed plan before starting the installation process.
To begin the process, the contractor will measure and cut the pipes to the correct size. They will then use fittings to connect the pipes together. Once all of the pipes are connected, the contractor will test the system to ensure that there are no leaks.
Install the Sprinkler Heads
The final step in the installation process is installing the sprinkler heads. This is generally an easy part of the process, but it is still important to do it correctly.
The contractor will start by installing the sprinkler heads in the areas that were planned during the initial planning stage. They will then connect the sprinkler heads to the pipes using fittings. Once all of the sprinkler heads are installed, the system will be tested again to ensure that everything is working properly.
If not, the contractor will have to go back and check the installation to see where the problem is. This can sometimes be frustrating, but it is important to ensure the system is installed correctly.
Contact fire sprinkler installation services to learn more.
Share